Applied Mixing Technology for Process Development: Scaling Down to Scale Up
Date: 14 March - 17 March 2022
Location: Online Platform
Tutors: Aaron Sarafinas
This is a NEW online short course and will be held Live via a Virtual Platform over four sessions – listed below.
Monday, March 14 | 2.00pm – 5.00pm GMT
Tuesday, March 15| 2.00pm – 5.00pm GMT
Wednesday, March 16 | 2.00pm – 5.00pm GMT
Thursday, March 17 | 2.00pm – 5.00pm GMT
Use of the proper mixing technology is often essential for successful process results. This online course considers how we can choose appropriate mixing conditions for laboratory, pilot, and commercial scale units to ensure technical success. The course begins by rooting us in some essential basics of mixing technology. With those fundamentals, we then progress through different mixing applications in increasing levels of complexity: single-phase (blending and heat transfer), multiple phase (solid-liquid, immiscible liquid, gas-liquid, and 3-phase), and mixing in competitive rate processes (reactions and crystallizations). Throughout, we look at scale-up and scale-down by using examples from industrial processes which have a variety of mixing requirements. We will discuss how to design and execute practical experiments at the small scale which can identify mixing sensitivities in a process that could be an issue on scale-up. Though primarily focusing on operations in stirred tanks, we will also discuss mixing applications in flow systems like static mixers.
- Why learn about mixing and what is “mixing” anyway?
- An introduction to some example industrial processes with multiple mixing requirements
- Foundations of mixing technology: power, flow, and “shear” (with some discussion of rheology)
- An introduction to mixing applications, revisiting the example processes
- Single-phase mixing applications and how they scale
- Miscible liquid blending (macromixing)
- Heat transfer
- Multiple-phase mixing applications and how they scale
- Solid-liquid mixing
- Liquid-liquid dispersion
- Gas-liquid dispersion
- Three-phase mixing
- Competitive rate processes (micromixing and mesomixing)
- Mixing-sensitive reactions
- Crystallizations and precipitations
- An efficient experimental method for screening mixing sensitivities: the Bourne Protocol
- Balancing different mixing requirements during scale-up and scale-down: scaling competitive rate processes and optimization
Who Should Attend
Scientists and engineers in the chemical and pharmaceutical industries who are involved in process development, scale-up/scale-down, troubleshooting, and process optimization.
- Mixing moderates some rate processes that can be critical for successful process results.
- Power, flow, and “shear” are the foundation upon which we can evaluate mixing applications.
- Predicable mixing performance can be estimated for single phase and multiple phase systems, along with the boundaries of “not enough mixing” and “too much mixing”.
- You cannot keep all mixing parameters the same when you scale up.
The course fee includes:
- Link to watch all two live sessions
- Electronic version of the course manual*
- Course certificate
For this on line course, there will be no recordings available and *the e reader manual is NOT printable or downloadable (due to copyright). If you prefer a hard copy of the manual you will have the opportunity of purchasing a professionally printed hard copy during the booking process.
2021 Online Delegate
The mixing technology course was very insightfull. A lot of eye-openers and really applicable knowledge by an excellent tutor
Online delegate 2021
Many complex concepts are so easily explained that everyone can understand. It has content from basics to advance level and touches upon all key areas of mixing. I highly recommend this course for chemists and process engineers.